Friday, July 11, 2008

Hand Painted Furniture - Pictures, Tips & Ideas


www.lalobadesign.com



Here are a few step by step instructions on how to paint a piece of furniture:

1.
Prepare work area - Place the furniture on a drop cloth in a ventilated area.

2. Prepare Furniture Piece - Remove hardware (drawer pulls, etc)

3. Sand - with fine-grit sandpaper to scuff the surface and prepare it to be painted. Wear gloves, safety goggles and a dust mask.

4. Clean off dust - Remove any residual sawdust with a damp rag (don't wet the wood) or tack cloth. You can also use a hand vacuum or brush.

5. Prime - Apply a coat of water-based primer. For smaller pieces, you may be able to use spray primer. The primer usually dries within 1 to 2 hours. Read the directions on the container. If the primer coat looks spotty or thin, apply a second coat and allow it to dry.

6. Base Coat - Add a coat of water-based paint. Brush or roll it on with even strokes, going in the direction of the wood grain. With spray paint, make slow passes with the can 8 to 12 inches from the wood surface. Allow the first coat to dry. Add a second coat and allow it to dry overnight.

7. The Fun Part - You can now start your decorative painting and/or faux finishing.

8. Last Step - Seal the piece with a water based varnish or polyurethane.



www.thefurniture.com




www.justvanities.com




www.judithbirdart.com




www.andartistry.com




www.artips.com



Check out these Great Resources on Painting Furniture:





0 comments:

Design by Dzelque Blogger Templates 2008

Murals & Faux Finishing - Tips, Advice, and Ideas - Design by Dzelque Blogger Templates 2008